{"title":"Sensors","description":"\u003cp\u003eBrowse our Sensors collection. Free Shipping.\u003c\/p\u003e","products":[{"product_id":"standalone-toggle-capacitive-touch-sensor-breakout-at42qt1012","title":"Standalone Toggle Capacitive Touch Sensor Breakout (AT42QT1012)","description":"\u003cp\u003eThis breakout board is the simplest way to create a project with a single \"toggle\" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.\u003c\/p\u003e\n\u003cp\u003eThis sensor is a toggle output type: touch-on then touch-off. That means that when a capacitive load is detected (e.g. a person touches the sensor-pad area) the red LED will alternate turning off and the output pin will go high or low, respectively. This sensor is good for a project where you want to activate something on the first touch, and then deactivate it when touching again, like a switch. You can also solder a wire to the middle pad and create your own capacitive pad if the built-in one isn't suited to your project.\u003c\/p\u003e\n\u003cp\u003eIf you want to save power, the LED can be disconnected from the output pin (cut the trace between the jumper marked as such). We designed this breakout to have infinite time-out. The chip does support having the sensor time-out, so for example, if something is turned on, it will eventually turn off on its own. If you'd like to use this mode, cut the TIMER jumper and then connect a resistor\/capacitor to the TIME pin. Check the datasheet for how to calculate the TIME pin to match your desired timeout.\u003c\/p\u003e\n\u003cp\u003eComes with a fully assembled board, and a small stick of 0.1\" header so you can solder and plug it into a breadboard. For additional contacts, we suggest using copper foil, then solder a wire that connects from the foil pad to the breakout.\u003c\/p\u003e\n\u003cp\u003eThe datasheet has many details on sensitivity, power usage, etc.\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs of July 25th, 2024\u003c\/strong\u003e – We've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 20mm x 29.35mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.03g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957694849208,"sku":"idj1787257016744","price":4.64,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/standalone-toggle-capacitive-touch-sensor-breakout-at42qt1012_1.jpg?v=1787257026"},{"product_id":"adxl377-high-g-triple-axis-accelerometer-200g-analog-out-discontinued","title":"ADXL377 - High-G Triple-Axis Accelerometer (+-200g Analog Out) [Discontinued]","description":"\u003cp\u003eHey rocket man (\u003cem\u003eburnin' out your fuse out there alone\u003c\/em\u003e) ever wonder how fast you're rocketing? The ADXL377 +-200g 3-axis accelerometer may be able to tell the answer. You read that right, this accelerometer can sense up to \u003cstrong\u003e200g's of force\u003c\/strong\u003e. Incredible! Not surprisingly, we couldn't say \"no\" to a breakout for this sensor.\u003cbr\u003e\u003cbr\u003eThe sensor is soldered onto a PCB with four mounting holes (in case you don't remember, this is accelerating at up to 200g's!) and a 3.3V regulator so you can use it with 5v logic such as an Arduino. We also add 0.01uF filter caps for 500Hz output bandwidth.\u003cbr\u003e\u003cbr\u003eThis breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75\"x0.75\" breakout board. The analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -200g is at 0v and 200g is at 3.3V with full scaling in between.\u003cbr\u003e\u003cbr\u003eFully assembled and tested. Comes with 8 pin 0.1\" standard header in case you want to use it with a breadboard or protoboard. Four 2.5mm (0.1\") mounting holes for easy attachment.\u003cbr\u003e\u003cbr\u003eThe XYZ filter capacitors are 0.01uF for a 500 Hz bandwidth\u003cbr\u003e\u003cbr\u003eSee the 3:44)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eDimensions (without header):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength:19mm\/0.75in\u003c\/li\u003e\n\u003cli\u003eWidth:19mm\/0.75in\u003c\/li\u003e\n\u003cli\u003eHeight:3.14mm\/0.12in\u003c\/li\u003e\n\u003cli\u003eWeight:1.27g\/0.04oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eADXL377 Datasheet, EagleCAD PCB files, and Fritzing object available in the product tutorial\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957694980280,"sku":"bfx1787257020827","price":15.19,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/adxl377---high-g-triple-axis-accelerometer--200g-analog-out-discontinued_1.jpg?v=1787257029"},{"product_id":"miniature-ttl-serial-jpeg-camera-with-ntsc-video","title":"Miniature TTL Serial JPEG Camera with NTSC Video","description":"\u003cp\u003e\u003cstrong\u003eThis Mini JPEG Camera Module captures colour images and video in a compact form factor, with built-in motion detection and serial image transfer, making it a great fit for security, monitoring, and data-logging projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis tiny little camera module can be a pretty neat project addition, it is just like our other \u003cstrong\u003eJPEG\u003c\/strong\u003e cameras (same chipset\/software), but much smaller and slimmer. It was designed to be used in security systems and does two main things - it \u003cstrong\u003eoutputs NTSC colour video\u003c\/strong\u003e and \u003cstrong\u003ecan take snapshots of that video\u003c\/strong\u003e (in colour) and transmit them over the TTL serial link. You can snap pictures at \u003cstrong\u003e640x480\u003c\/strong\u003e, \u003cstrong\u003e320x240\u003c\/strong\u003e or \u003cstrong\u003e160x120\u003c\/strong\u003e and they're pre-compressed JPEG images which makes them nice and small and easy to store on an SD card. Perfect for a data-logging, security, or photography project.\u003c\/p\u003e\n\u003cp\u003eOne nice thing about this particular camera is all the '\u003cstrong\u003eextras\u003c\/strong\u003e' that come with it. For example it has auto-white-balance, auto-brightness and auto-contrast taken care of for you as well as motion detection built in! That means you can have it alert your project when something moved in the frame. The lens is manually adjustable, it has a \u003cstrong\u003e1-15 meter focal distance\u003c\/strong\u003e by default which is good for most projects.\u003c\/p\u003e\n\u003cp\u003eWe also carry a much larger, but enclosed weather-proof version.\u003c\/p\u003e\n\u003cp\u003eUsing the module is pretty easy and only requires two digital pins (or a TTL serial port) - by default it transmits at \u003cstrong\u003e38400 baud\u003c\/strong\u003e. Of course we wouldn't just leave you with a datasheet and a 'good luck', we even spent a lot of time researching the module and DSP to make really nice libraries for both Arduino \u0026amp; CircuitPython, with example code that shows how to change the image size and compression quality, detect motion, control the video output stream, etc. That and more is available in our very detailed tutorial that will help get the most use out of your camera.\u003c\/p\u003e\n\u003cp\u003eExample photo 1 (outside street) \u0026amp; example photo 2 (inside person).\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/N2lcKqubDE8?si=Jp-FTxhI8rt-cOuM\u0026amp;start=295\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompact camera module with NTSC colour video output\u003c\/li\u003e\n\u003cli\u003eCaptures JPEG snapshots at 640x480, 320x240 or 160x120 resolution\u003c\/li\u003e\n\u003cli\u003ePre-compressed JPEG images for easy storage and transmission\u003c\/li\u003e\n\u003cli\u003eTTL serial communication at 38400 baud\u003c\/li\u003e\n\u003cli\u003eAuto-white-balance, auto-brightness and auto-contrast\u003c\/li\u003e\n\u003cli\u003eBuilt-in motion detection with alerting capability\u003c\/li\u003e\n\u003cli\u003eManually adjustable lens with 1-15 metre focal distance\u003c\/li\u003e\n\u003cli\u003eRequires only two digital pins or TTL serial port for operation\u003c\/li\u003e\n\u003cli\u003eCompatible with Arduino and CircuitPython libraries\u003c\/li\u003e\n\u003cli\u003eIncludes comprehensive tutorial and example code\u003c\/li\u003e\n\u003cli\u003eIdeal for security, data-logging and photography projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModule size: 20mm x 28mm\u003c\/li\u003e\n\u003cli\u003eModule Weight: 3g\u003c\/li\u003e\n\u003cli\u003eImage sensor: CMOS 1\/4 inch\u003c\/li\u003e\n\u003cli\u003eCMOS Pixels: 30M\u003c\/li\u003e\n\u003cli\u003ePixel size: 5.6um*5.6um\u003c\/li\u003e\n\u003cli\u003eManual focus adjustable from 5 to 15meters\u003c\/li\u003e\n\u003cli\u003eOutput format: Standard JPEG\u003c\/li\u003e\n\u003cli\u003eWhite balance: Automatic\u003c\/li\u003e\n\u003cli\u003eExposure: Automatic\u003c\/li\u003e\n\u003cli\u003eGain: Automatic\u003c\/li\u003e\n\u003cli\u003eShutter: Electronic rolling shutter\u003c\/li\u003e\n\u003cli\u003eSNR: 45DB\u003c\/li\u003e\n\u003cli\u003eDynamic Range: 60DB\u003c\/li\u003e\n\u003cli\u003eMax analogue gain: 16DB\u003c\/li\u003e\n\u003cli\u003eFrame speed: 640*480 30fps\u003c\/li\u003e\n\u003cli\u003eScan mode: Progressive scan\u003c\/li\u003e\n\u003cli\u003eViewing angle: 60 degrees\u003c\/li\u003e\n\u003cli\u003eImage size: VGA（640*480), QVGA（320*240), QQVGA（160*120）\u003c\/li\u003e\n\u003cli\u003eBaud rate: Default 38400\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 75mA\u003c\/li\u003e\n\u003cli\u003eOperating voltage: DC +3-5V (the power pin is marked 3.3V but it goes into a 3-5V input regulator so you can power it with 3-5VDC)\u003c\/li\u003e\n\u003cli\u003eCommunication: 3.3V TTL （Three wire TX, RX, GND）\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLibrary\u003c\/li\u003e\n\u003cli\u003ePTC-08 Datasheet\u003c\/li\u003e\n\u003cli\u003eDSP Management tool\u003c\/li\u003e\n\u003cli\u003eProtocol cheat sheet\u003c\/li\u003e\n\u003cli\u003eTutorial\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Miniature TTL Serial JPEG Camera with NTSC Video\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957695111352,"sku":"jhx1787257024481","price":21.8,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/miniature-ttl-serial-jpeg-camera-with-ntsc-video_1.jpg?v=1787257033"},{"product_id":"hall-effect-sensor-us5881lua","title":"Hall effect sensor (US5881LUA)","description":"\u003cp\u003eHall effect sensors detect whether a magnet is near. Useful for non-contact\/waterproof type switches, position sensors, and rotary\/shaft encoders. I tried dozens of different hall effect sensors to see which one would work best for the SpokePOV kit (to determine the wheel location) and this one came out on top!\u003c\/p\u003e\n\u003cp\u003eRuns from 3.5V up to 24V. To use connect power to pin 1 (all the way to the left), ground to pin 2 (middle) and then a 10K pull-up resistor from pin 3 to power. Then listen on pin 3, when the south pole of a magnet is near the front of the sensor, pin 3 will go down to 0V. Otherwise, it will stay at whatever the pullup resistor is connected to. Nothing occurs if a magnet's north pole is nearby (unipolar).\u003c\/p\u003e\n\u003cp\u003eWorks fantastic with the high-strength magnet – Read the datasheet.\u003c\/p\u003e\n\u003cp\u003eRead a nice whitepaper from the manufacturer with many ideas and designs for use.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 1.51mm\/0.06in\u003c\/li\u003e\n\u003cli\u003eWidth: 4.08mm\/0.16in\u003c\/li\u003e\n\u003cli\u003eHeight: 3.00mm\/0.12in\u003c\/li\u003e\n\u003cli\u003eWeight: 0.1g\/0.004oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53957735841976,"sku":"xec1787257192361","price":1.32,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/hall-effect-sensor-us5881lua_1.jpg?v=1787257200"},{"product_id":"cap1188-8-key-capacitive-touch-sensor-breakout-i2c-or-spi","title":"CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI","description":"\u003cp\u003eAdd lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboard LEDs when the matching touch sensor fires to help you debug your sensor setup.\u003c\/p\u003e\n\u003cp\u003eThe CAP1188 has support for both I2C and SPI, so it is easy to use with any microcontroller. If you are using I2C, you can select one of 5 addresses, for a total of 40 capacitive touch pads on one I2C 2-wire bus. Using this chip is a lot easier than doing the capacitive sensing with analogue inputs: it handles all the filtering for you and can be configured for more\/less sensitivity.\u003c\/p\u003e\n\u003cp\u003eComes with a fully assembled board, and a stick of 0.1\" header so you can plug it into a breadboard. For contacts, we suggest using copper foil, then solder a wire that connects from the foil pad to the breakout.\u003c\/p\u003e\n\u003cp\u003eGetting started is a breeze with our Arduino library and tutorial. You'll be up and running in a few minutes, and if you are using another microcontroller, it's easy to port our code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Breadboard, Arduino UNO board and cables are \u003cstrong\u003eNOT \u003c\/strong\u003eincluded\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 42mm x 18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDownloads and Tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957736038584,"sku":"fev1787257194163","price":6.01,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/cap1188---8-key-capacitive-touch-sensor-breakout---i2c-or-spi_1.jpg?v=1787257202"},{"product_id":"ir-distance-sensor-includes-cable-100cm-500cm-gp2y0a710k0f-discontinued","title":"IR Distance Sensor - Includes Cable (100cm-500cm) (GP2Y0A710K0F) [Discontinued]","description":"\u003cp\u003eThis extra-long-range SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be used to determine how close the nearest object is. Comes with 6\" long 6-JST interface wire. These sensors are good for detection between 100cm-500cm (1-5 meters \/ 3-15 feet). The long range makes them a good alternative to sonar sensors.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease note: the wire colorings are not intuitive! Watch out before wiring!\u003c\/strong\u003e \u003cstrong\u003eThe datasheet has wiring details\u003c\/strong\u003e. Connect the two outer ground wires both to ground, the two 'VCC' wires both to 5VDC power, and read the analog signal from the Vo wire. The analog voltage out will range from 3V when an object is about 100cm away and 1.4V when the object is 500cm away. For a full graph, showing the distance to analog range, check the datasheet below.\u003cbr\u003e\u003cbr\u003eThese sensors tend to be a little noisy, we suggest soldering\/connecting the included 220uF capacitor to the same place you connect the wires, to provide some filtering on the power supply. Connect the + pin of the capacitor to the Vcc wire connection, and the - pin of the capacitor to the GND wire connection.\u003cbr\u003e\u003cbr\u003eFor more information, 12:37)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 58mm x 17.6mm x 22.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 11g with cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOne 4.2mm diameter mounting hole. For more information, please see the datasheet!\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957736071352,"sku":"xnq1787257194294","price":19.67,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/ir-distance-sensor---includes-cable-100cm-500cm-gp2y0a710k0f-discontinued_1.jpg?v=1787257203"},{"product_id":"ir-distance-sensor-includes-cable-10cm-80cm-gp2y0a21yk0f","title":"IR distance sensor includes cable (10cm-80cm) (GP2Y0A21YK0F)","description":"\u003cp\u003e\u003cstrong\u003eThe SHARP distance sensor uses infrared reflection to measure distances from 10 cm to 80 cm, outputting an analogue voltage for simple integration, and includes a 12\" JST cable for quick connection to microcontroller projects.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis \u003cstrong\u003eSHARP distance sensor\u003c\/strong\u003e bounces IR off objects to determine how far away they are. It returns an analogue voltage that can be used to determine how close the nearest object is. Comes with \u003cstrong\u003e12\" long 3-JST interface wire\u003c\/strong\u003e. These sensors are good for short-range detection. For over 1 m distance, we suggest using sonar sensors\u003c\/p\u003e\n\u003cp\u003eTo use, connect black wire to ground, red wire to \u003cstrong\u003e5V \u003c\/strong\u003eand white wire to analog input. The analogue voltage out will range from \u003cstrong\u003e3V\u003c\/strong\u003e when an object is only 4\" (10 cm) away and \u003cstrong\u003e0.4V\u003c\/strong\u003e when the object is 32\" (80 cm) away\u003c\/p\u003e\n\u003cp\u003eFor more information, please see the Sharp website (link in our resources section). Note that it's not well documented but the case is conductive! So if you're mounting to a metal chassis, use a rubber gasket to isolate it.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInfrared distance sensor with analogue voltage output\u003c\/li\u003e\n\u003cli\u003eDetects objects between 4\" (10 cm) and 32\" (80 cm)\u003c\/li\u003e\n\u003cli\u003e3V output at 4\" distance, 0.4V output at 32\" distance\u003c\/li\u003e\n\u003cli\u003eIncludes 12\" long 3-JST interface wire\u003c\/li\u003e\n\u003cli\u003eConnect black wire to ground, red wire to 5V, white wire to analogue input\u003c\/li\u003e\n\u003cli\u003eIdeal for short-range object detection\u003c\/li\u003e\n\u003cli\u003eFor distances over 1 meter, sonar sensors recommended\u003c\/li\u003e\n\u003cli\u003eConductive case - use rubber gasket when mounting to metal chassis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 13.53mm\u003c\/li\u003e\n\u003cli\u003eWidth: 44.39mm\u003c\/li\u003e\n\u003cli\u003eHeight: 18.67mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.5g\u003c\/li\u003e\n\u003cli\u003eScrew holes are 37mm apart, 3.2mm diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLink to Sharp Global\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x IR distance sensor includes cable (10cm-80cm)\u003c\/li\u003e\n\u003cli\u003e1x 12\" long 3-JST interface wire\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957736169656,"sku":"agz1787257195313","price":9.65,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/ir-distance-sensor-includes-cable-10cm-80cm-gp2y0a21yk0f_1.jpg?v=1787257203"},{"product_id":"tmp36-analog-temperature-sensor","title":"TMP36 Analog Temperature Sensor","description":"\u003cp\u003eWide range, low power temperature sensor outputs an analog voltage that is proportional to the ambient temperature. To use, connect pin 1 (left) to power (between 2.7 and 5.5V), pin 3 (right) to ground, and pin 2 to analog in on your microcontroller. The voltage out is 0V at -50°C and 1.75V at 125°C. You can easily calculate the temperature from the voltage in millivolts: \u003cstrong\u003eTemp °C = 100*(reading in V) - 50\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSee the webpage for datasheets and more information.\u003c\/p\u003e\u003cp\u003eFor a full tutorial with wiring diagrams, Arduino and CircuitPython code examples and project ideas, please read the TMP36 temperature sensor tutorial page!\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"\/images\/tmp36graph.gif\"\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 3.5mm \/ 0.14\"\u003c\/li\u003e\n\u003cli\u003eWidth: 4.6mm \/ 0.18\"\u003c\/li\u003e\n\u003cli\u003eHeight: 19mm \/ 0.74\"\u003c\/li\u003e\n\u003cli\u003eWeight: 0.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53957736267960,"sku":"nsg1787257196445","price":1.67,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/tmp36-analog-temperature-sensor_1.jpg?v=1787257204"},{"product_id":"adxl335-5v-ready-triple-axis-accelerometer-3g-analogue-out","title":"ADXL335 - 5V ready triple-axis accelerometer (+-3g analogue out)","description":"\u003cp\u003eWe've updated our favourite triple-axis accelerometer to now have an onboard 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analogue outputs for X, Y and Z axis measurements on a 0.75\"x0.75\" breakout board. The ADXL335 is the latest and greatest from analogue devices, known for its exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analogue outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\u003c\/p\u003e\n\u003cp\u003eFully assembled and tested. Comes with an 8-pin 0.1\" standard header in case you want to use it with a breadboard or perfboard. Two 2mm (0.08\") mounting holes for easy attachment.\u003c\/p\u003e\n\u003cp\u003eThe XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\u003c\/p\u003e\n\u003ch3\u003eRevision History\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of August 2024\u003c\/strong\u003e – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (without header)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 19mm\u003c\/li\u003e\n\u003cli\u003eWidth: 19mm\u003c\/li\u003e\n\u003cli\u003eHeight: 3.14mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.27g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTutorial and Downloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957736464568,"sku":"hph1787257197865","price":10.8,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/adxl335---5v-ready-triple-axis-accelerometer--3g-analogue-out_1.jpg?v=1787257207"},{"product_id":"adafruit-veml6070-uv-index-sensor-breakout-discontinued","title":"Adafruit VEML6070 UV Index Sensor Breakout [Discontinued]","description":"\u003cp\u003eThis little sensor is a great way to add UV light sensing to any microcontroller project. The VEML6070 from Vishay has a true UV A light sensor and an I2C-controlled ADC that will take readings and integrate them for you over ~60ms to 500ms.\u003c\/p\u003e\u003cp\u003eUnlike the Si1145, this sensor will not give you UV Index readings. However, the Si1145 does UV Index approximations based on light level not true UV sensing. The VEML6070 in contrast does have a real light sensor in the UV spectrum. It's also got a much much simpler I2C interface so you can run it on the smallest microcontrollers with ease. Unlike the GUVA analog sensor, the biasing and ADC is all internal so you don't need an ADC.\u003c\/p\u003e\u003cp\u003eThis UV sensor works great with 3 or 5V power or logic, its nice and compact, and its easy to use with any I2C-capable microcontroller. Each order comes with one assembled PCB with a sensor, some handy pullup resistors, a 270K rset resistor and a small piece of header. Some light soldering is required to attach the header but its a fast task!\u003c\/p\u003e\u003cp\u003eCheck out our tutorial for details on on how to use this sensor, including files, code and assembly!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eVEML6070 Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUV spectrum sensitivity: 320-410nm (peak at 355nm)\u003c\/li\u003e\n\u003cli\u003eVoltage Supply: 2.7-5.5V\u003c\/li\u003e\n\u003cli\u003eSchematic, Datasheet, EagleCAD PCB files, and Fritzing available in the product tutorial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 14.0mm x 13.0mm x 3.0mm \/ 0.6\" x 0.5\" x 0.1\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 0.5g \/ 0.0oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957760843960,"sku":"fbb1787257334739","price":4.07,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/adafruit-veml6070-uv-index-sensor-breakout-discontinued_1.jpg?v=1787257342"},{"product_id":"2x7a-dc-motor-driver","title":"2x7A DC Motor Driver","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e This is an ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system. It is very considerate to own an Photo Coupler isolation for all the signals in case of that the motor's Reverse Current would interfere the control signals. Besides all, all the interfaces includes ESD (electro-static discharge) protection.\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cp\u003e\u003c\/p\u003e\n\u003cli\u003eVoltage supply: DC 7 ~ 24 V\n\u003c\/li\u003e\n\u003cli\u003eVoltage supply limit: 6.5 ~ 27 V\n\u003c\/li\u003e\n\u003cli\u003eControl signal Level (Compatible 3.3V\/5V)\n\u003c\/li\u003e\n\u003cdiv style=\"margin-left: 25px;\"\u003e\n\u003cdiv\u003e\u003cli\u003e High: DC 3.0 ~ 6.5 V\n\u003c\/li\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cli\u003e Low: DC0 ~ 0.8 V\n\u003c\/li\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cli\u003eOutput Channel: 2\n\u003c\/li\u003e\n\u003cli\u003eControl signal current: 3 ~ 11 mA (Each route)\n\u003c\/li\u003e\n\u003cli\u003eMaximum continuous operating current: 7 A\n\u003c\/li\u003e\n\u003cli\u003ePeak current: 50 A\n\u003c\/li\u003e\n\u003cli\u003eSpeed control: PWM\n\u003c\/li\u003e\n\u003cdiv style=\"margin-left: 25px;\"\u003e\u003cdiv\u003e\u003cli\u003e Minimum valid Pulse Width: 5 us\n\u003c\/li\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003cli\u003eWorking Temperature: -25 ~ 85 °C\n\u003c\/li\u003e\n\u003cli\u003eMounting Hole: M3\n\u003c\/li\u003e\n\u003cli\u003eDimension (Length * Width * Height): 55 x 55(mm)\/2.165 x 2.165(in)\n\u003c\/li\u003e\n\u003cli\u003eWeight: 32g\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cli\u003eProduct WIKI\u003c\/li\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cli\u003e7A Dual DC Motor Driver x1\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53957799182520,"sku":"elx1787257558406","price":16.16,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/2x7a-dc-motor-driver_1.jpg?v=1787257566"},{"product_id":"128x64-graphic-lcd-discontinued","title":"128x64 Graphic LCD [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis is a 128x64 liquid crystal display that support Chinese character ,  English characters and even graphics, very suitable for interactive work with Arduino.\u003c\/p\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 5V\u003c\/li\u003e\n\u003cli\u003eWith Chinese font\u003c\/li\u003e\n\u003cli\u003eBlue backlit\u003c\/li\u003e\n\u003cli\u003eController: ST7920\u003c\/li\u003e\n\u003cli\u003eSize: 93x70mm (3.7x2.8 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSetting Pixels for ST7920 based 128x64 LCD\u003c\/li\u003e\n\u003cli\u003eData sheet for ST7920\u003c\/li\u003e\n\u003cli\u003eArduino library v1.0 for serial mode\u003c\/li\u003e\n\u003cli\u003eArduino library v1.0 for parallel mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e128x64 Graphic LCD  x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957799215288,"sku":"znc1787257558384","price":12.46,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/128x64-graphic-lcd-discontinued_1.jpg?v=1787257566"},{"product_id":"gravity-df05bb-tiltpan-kit-5kg","title":"Gravity: DF05BB Tilt\/Pan Kit (5kg)","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis DF05BB Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot! Includes hardware and two DF05 ball bearing servos.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eWorking Voltage: 4.8-6V\u003c\/li\u003e\n\u003cli\u003eWorking current: 0.1-0.8 A\u003c\/li\u003e\n\u003cli\u003eTorque: 4.8kg-cm @ 4.8V ; 5.5kg-cm @6V\u003c\/li\u003e\n\u003cli\u003eAverage speed: 60 rpm\u003c\/li\u003e\n\u003cli\u003eRotation range: 0- 120\u003c\/li\u003e\n\u003cli\u003eWorking Temperature: 0\u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e~55\u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: 41 x 20 x 38mm\u003c\/li\u003e\n\u003cli\u003eWeight: 48g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e2x DF05BB Standard Servo\u003c\/li\u003e\n\u003cli\u003e1x Aluminum multifunction bracket\u003c\/li\u003e\n\u003cli\u003e1x Aluminum U-shape bracket\u003c\/li\u003e\n\u003cli\u003e1x Bearing cup\u003c\/li\u003e\n\u003cli\u003e1x High-quality sets of screw nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957799280824,"sku":"qhr1787257558692","price":10.66,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/gravity-df05bb-tiltpan-kit-5kg_1.jpg?v=1787257567"},{"product_id":"gravity-digital-led-string-lights-warm-white-for-arduino-discontinued","title":"Gravity: Digital LED String Lights (Warm White) For Arduino [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e These LED string lights are composed of a series of warm white LEDs that can be used for\u003cspan style=\"line-height: 1.42857;\"\u003e decoration or other interesting applications. Use them as outdoor string lights, string lights in your bedroom, on your patio or on a globe, even as Christmas lights.\u003c\/span\u003e Create a fading effect using PWM or power them at a fixed voltage.\u003cbr\u003e\u003cp\u003e\u003cb\u003e\u003cfont color=\"#ff9c00\"\u003eNote: Use the provided adapter to power the string to avoid risk of damage.\u003c\/font\u003e\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis item uses a Gravity interface for plug and play usage. Use an Ardiuno IO Expansion Shield for a convenient solution to connect to your Arduino. This sensor works at 3.3V, making it compatible with Raspberry Pi, Intel Edison, Intel Joule and Intel Curie. \u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003c\/div\u003e \u003ch2\u003e \u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cp\u003e\u003c\/p\u003e\n\u003cli\u003eOperating Voltage: 2.5 ~ 5V (5V Recommended)\n\u003c\/li\u003e\n\u003cli\u003eLED Length: 4 meters\/40 LEDs\n\u003c\/li\u003e\n\u003cli\u003eAdapter Dimensions: 30 x 22 mm\/1.18 x 0.86\"\u003c\/li\u003e\n\u003cli\u003eWeight: 26g\u003c\/li\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cli\u003e\nProduct Wiki \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMore Documents \u003c\/li\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cli\u003eGravity: LED String Lights (Warm White) x1\n\u003c\/li\u003e\n\u003cli\u003eLED String Lights Adapter x1\n\u003c\/li\u003e\n\u003cli\u003eGravity Digital Cable x1\n\u003c\/li\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957799313592,"sku":"wta1787257559046","price":6.74,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/gravity-digital-led-string-lights-warm-white-for-arduino-discontinued_1.jpg?v=1787257567"},{"product_id":"basic-16x2-character-lcd-black-on-yellow-5v-discontinued","title":"Basic 16x2 Character LCD - Black on Yellow 5V [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eStandard 16x2 character LCD display. It has a basic 16 character by 2 line display with a yellow background with black characters.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003eYou could get a compatible \u003c\/span\u003eLCD pannel\u003cspan style=\"line-height: 20.7999992370605px;\"\u003e or \u003c\/span\u003eI2C LCD backpack\u003cspan style=\"line-height: 20.7999992370605px;\"\u003e here.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage:5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e16x2 Character LCD x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957799346360,"sku":"uzj1787257559132","price":6.16,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/basic-16x2-character-lcd---black-on-yellow-5v-discontinued_1.jpg?v=1787257567"},{"product_id":"basic-16x2-character-lcd-white-on-blue-5v","title":"Basic 16x2 Character LCD - White on Blue 5V","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eStandard 16x2 character LCD display. It has a basic 16 character by 2 line display with a blue background with white characters.\u003cbr\u003e\n\u003cbr\u003e\nYou could get a compatible LCD pannel or I2C LCD backpack here.\u003c\/p\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage:5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e16x2 Character LCD x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957799379128,"sku":"sys1787257559066","price":2.14,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/basic-16x2-character-lcd---white-on-blue-5v_1.jpg?v=1787257567"},{"product_id":"micro-metal-gearmotor-501-discontinued","title":"Micro Metal Gearmotor 50:1 [discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis motor has a long (0.365\" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use the mounting bracket or extended mounting bracket, which are specifically designed to securely mount the gearmotor while enclosing the exposed gears. We recommend the extended mounting bracket for wheels with recessed hubs, such as the wheel 42×19 mm.\u003c\/p\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eMotor speed (No gearbox):13000 rpm\u003c\/li\u003e\n\u003cli\u003eGear ratio: \u003cspan style=\"line-height: 20.7999992370605px;\"\u003e50:1 \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor speed (with gearbox): 260 rpm\u003c\/li\u003e\n\u003cli\u003eRated current: 30mA @ 6V\u003c\/li\u003e\n\u003cli\u003eStall current: \u003cspan style=\"line-height: 20.7999992370605px;\"\u003e350mA \u003c\/span\u003e@ 6V\u003c\/li\u003e\n\u003cli\u003eStall torque: 0.39kg*cm @ 6V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eMicro Metal Gearmotor    x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957799772344,"sku":"giy1787257564992","price":3.71,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/micro-metal-gearmotor-501-discontinued_1.jpg?v=1787257573"},{"product_id":"micro-metal-gearmotor-extended-bracket-pair","title":"Micro Metal Gearmotor Extended Bracket (Pair)","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis compact bracket enables convenient mounting of popular micro metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with our 49x12 Wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eMicro motor brackets x2\u003c\/li\u003e\n\u003cli\u003eMounting screws ×4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957800394936,"sku":"hzl1787257568729","price":2.62,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/micro-metal-gearmotor-extended-bracket-pair_1.jpg?v=1787257577"},{"product_id":"45w-dc-dc-converter-9v5a-discontinued","title":"45W DC-DC Converter 9V@5A [Discontinued]","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eThis is a waterproof DC-DC converter. With 16-36V DC input, it converts to 9V 5A which is a good supply for robots.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection\u003c\/li\u003e\n\u003cli\u003eOverheat protection\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection\u003c\/li\u003e\n\u003cli\u003eWaterproof and shockproof case\u003c\/li\u003e\n\u003cli\u003eHigh efficiency and less heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Rage: 16-36V DC\u003c\/li\u003e\n\u003cli\u003eOutput: 9V DC\u003c\/li\u003e\n\u003cli\u003eOutput Current: 5A\u003c\/li\u003e\n\u003cli\u003eSize: 58 X 40.5 X 22mm(2.28x1.59x0.87\")\u003c\/li\u003e\n\u003cli\u003eEfficiency: 96%\u003c\/li\u003e\n\u003cli\u003eWeight:0.09Kg\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature:80 ℃\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e45W DC-DC Converter(FIT0169) x1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957800427704,"sku":"qfd1787257568844","price":9.0,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/45w-dc-dc-converter-9v5a-discontinued_1.jpg?v=1787257577"},{"product_id":"38w-dc-dc-converter-75v5a","title":"38W DC-DC Converter 7.5V@5A","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eThis is a waterproof DC-DC converter. With 12V\/24V (11-35V) DC input, it converts to \u003cspan data-mce-fragment=\"1\"\u003e7.5V@5A\u003c\/span\u003e which is an ideal supply for robots.\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection\u003c\/li\u003e\n\u003cli\u003eOverheat protection\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection\u003c\/li\u003e\n\u003cli\u003eWaterproof and shockproof case\u003c\/li\u003e\n\u003cli\u003eHigh efficiency and less heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eInput Rage: 11-35V DC\u003c\/li\u003e\n\u003cli\u003eOutput: 7.5V DC\u003c\/li\u003e\n\u003cli\u003eOutput Current: 5A\u003c\/li\u003e\n\u003cli\u003eSize: 58 X 40.5 X 22mm(2.28x1.59x0.87\")\u003c\/li\u003e\n\u003cli\u003eEfficiency: 96%\u003c\/li\u003e\n\u003cli\u003eWeight:0.09Kg\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature:80 ℃\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x 38W DC-DC Converter(FIT0168)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53957800460472,"sku":"tcj1787257568861","price":10.5,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/38w-dc-dc-converter-75v5a_1.jpg?v=1787257578"},{"product_id":"adafruit-veml7700-lux-sensor-i2c-light-sensor-stemma-qt-qwiic","title":"Adafruit VEML7700 Lux Sensor - I2C Light Sensor - STEMMA QT \/ Qwiic","description":"\u003cp\u003e Vishay has a lot of light sensors out there, and this is a nice simple lux sensor that's easy to add to any microcontoller. Most light sensors just give you a number for brighter\/darker ambient lighting. The VEML7700 makes your life easier by calculating the lux, which is an SI unit for light. You'll get more consistent readings between multiple sensors because you aren't dealing with some unit-less values.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe sensor has 16-bit dynamic range for ambient light detection from 0 lux to about 120 klux with resolution down to 0.0036 lx\/ct, with software-adjustable gain and integration times.\u003cbr\u003e\u003cbr\u003eInterfacing is easy - this sensor uses plain, universal I2C. We put this sensor on a breakout board with a 3.3V regulator and logic level shifter so you can use it with 3.3V or 5V power\/logic microcontrollers. We have written libraries for Arduino (C\/C++) as well as CircuitPython (Python 3) so you can use this sensor with just about any kind of device, even a Raspberry Pi!\u003cbr\u003e\u003cbr\u003eAs if that weren't enough, we've also added SparkFun qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder. Just wire up to your favorite micro with a plug-and-play cable to get lux data ASAP. For a no-solder experience, just wire up to your favorite micro, like the ESP32 V2 Feather using a STEMMA QT adapter cable. The Stemma QT connectors also mean the VEML can be used with our various associated accessories. QT Cable is not included, but we have a variety in the shop\u003cbr\u003e\u003cbr\u003eThis is Kattni's first PCB design for Adafruit, it's even signed on the back!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GWHf08bQxi0?start=357\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of November 2022, \u003c\/strong\u003ewe've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of April 11, 2022, \u003c\/strong\u003ethis board now comes in STEMMA QT format. Functionality and schematic remain the same. Physical shape has changed to make it plug-and-play, much easier to use with no soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary Guide: Adafruit VEML7700 Ambient Light Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 16.6mm x 16.5mm x 4.0mm\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 1.0g \/ 0.0oz\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957865472184,"sku":"ans1787257930593","price":3.6,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/adafruit-veml7700-lux-sensor---i2c-light-sensor---stemma-qt-qwiic_1.jpg?v=1787257938"},{"product_id":"35mm-dual-ir-emitter-3m-cable","title":"3.5mm Dual IR Emitter - 3m Cable","description":"\u003cp\u003eThis handy IR (Infrared) emitter is great for extending the range of any IR equipment with a 3.5mm fitting.\u003c\/p\u003e\n\u003cp\u003eIt's compatible with any TV, STB, DVD etc. that features an IR output in 3.5mm plug format. High quality black cable, with 3m dual IR infrared emitters and a 3.5mm male jack plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.5mm Dual IR Emitter Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTransmit IR commands to AV equipment\u003c\/li\u003e\n\u003cli\u003eSuitable for TV sets, STB, DVD, DVR, PVR, remote controls, video recorders, satellite receivers etc.\u003c\/li\u003e\n\u003cli\u003eUniversal IR extender cable with 3.5mm jack for connection\u003c\/li\u003e\n\u003cli\u003eDual emitters on a single plug\u003c\/li\u003e\n\u003cli\u003ePeaks Wave Length (?p): 940nm\u003c\/li\u003e\n\u003cli\u003eCable length: 3m\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ModMyPi","offers":[{"title":"Default Title","offer_id":53957865537720,"sku":"gtz1787257932597","price":2.52,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/35mm-dual-ir-emitter---3m-cable_1.jpg?v=1787257940"},{"product_id":"3dbi-ads-b-1090mhz-sma-antenna-w-magnetic-base","title":"3dBi ADS-B 1090Mhz SMA Antenna w\/ Magnetic Base","description":"\u003cp\u003eThis neat little 3DBi ADS-B 1090Mhz SMA Antenna with Magnetic Base is designed to receive ADS-B data from aircraft! It features an SMA Male connecter, so it's compatible with all ADS-B receivers including FlightAware Dongles, PiAware, Mode S Beast, Radarcape, Kinetic SBS1\/SBS3, RTL Dongles, and more. It's designed to attach neatly to an internal metal surface and track planes as they drift on by.\u003c\/p\u003e\n\u003cp\u003eCustomers should be aware that ADS-B signals do not penetrate solid surfaces well, and the antenna should be placed high and next to a thin external surface e.g. a window. Don't expect this to work well through 12\" of brickwork!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 1090MHz\u003c\/li\u003e\n\u003cli\u003eGain: 3dBi (Max)\u003c\/li\u003e\n\u003cli\u003ePolarization Type: Vertical\u003c\/li\u003e\n\u003cli\u003eRated Power: 50W\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 50 Ohms nominal\u003c\/li\u003e\n\u003cli\u003eCable Length: 3M\u003c\/li\u003e\n\u003cli\u003eConnector Type: SMA Male Plug\u003c\/li\u003e\n\u003cli\u003eRod length: 17cm\u003c\/li\u003e\n\u003cli\u003eInternal Use Only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":53957865636024,"sku":"efa1787257933708","price":3.35,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/3dbi-ads-b-1090mhz-sma-antenna-w-magnetic-base_1.jpg?v=1787257941"},{"product_id":"dexter-gopigo-distance-sensor-discontinued","title":"Dexter - GoPiGo Distance Sensor [Discontinued]","description":"\u003cp\u003eDistance Sensor for the GoPiGo! The distance sensor can be mounted to the GoPiGo Raspberry Pi robot using the servo package to enable rotation. It detects distances from obstacles and objects, giving your robot the ability to navigate.\u003c\/p\u003e\n\u003cp\u003eThis package includes the cable for connecting the Distance Sensor to the GoPiGo!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s a distance sensor? \u003c\/strong\u003eThe distance sensor uses a small laser to determine the distance to an object. The sensor uses the Time of Flight method for a very fast and accurate distance reading. The package includes two googly eyes to give your robots a lively look!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eObstacle Avoiding Robots! \u003c\/strong\u003eDistance sensors are great for programming robots that can avoid objects. They do this by measuring the time interval between sending a small invisible laser pulse and receiving the light back, and based on the time it takes, calculating distance to an object. This comes in handy when you are programming a robot to detect objects and find their way around them.\u003c\/p\u003e","brand":"Dexter Industries","offers":[{"title":"Default Title","offer_id":53957865701560,"sku":"rnu1787257934711","price":13.59,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/dexter---gopigo-distance-sensor-discontinued_1.jpg?v=1787257943"},{"product_id":"dexter-inertial-measurement-unit-imu-sensor-discontinued","title":"Dexter - Inertial Measurement Unit (IMU) Sensor [Discontinued]","description":"\u003cp\u003e\u003cstrong\u003eIMU Sensor for a Raspberry Pi Robot. \u003c\/strong\u003eThe IMU (Inertial Measurement Unit) Sensor can be mounted to Dexter Industries robots like the GoPiGo, GrovePi, and BrickPi . It detects motion, orientation, and position of your robot.\u003c\/p\u003e\n\u003cp\u003eThe sensor has 9 degrees of freedom (9-DOF) and provides an accurate and high-speed orientation of your robot. The sensor has a built in compass, accelerometer, and gyroscope. You can use these to tell which compass direction your robot is turned to, how fast it is turning, what angle it is to the ground, and how fast it is changing speed.\u003c\/p\u003e\n\u003cp\u003eIt comes with a grove cable to plug the sensor into the GoPiGo3, BrickPi, or GrovePi and begin measuring; no soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassroom Projects. \u003c\/strong\u003eThis sensor can be paired with the Distance Sensor and used by educators to teach advanced math concepts as they turn their BrickPi or GoPiGo into a BalanceBot!\u003c\/p\u003e","brand":"Dexter Industries","offers":[{"title":"Default Title","offer_id":53957865767096,"sku":"sxn1787257935869","price":6.66,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/dexter---inertial-measurement-unit-imu-sensor-discontinued_1.jpg?v=1787257944"},{"product_id":"ds18b20-one-wire-digital-temperature-sensor","title":"DS18B20+ One Wire Digital Temperature Sensor","description":"\u003cdiv\u003eA genuine Maxim sourced DS18B20+ One Wire Digital Temperature Sensor. The DS18B20+ is the perfect low-cost solution for a range of Raspberry Pi and Arduino temperature control and data-logging projects! The DS18B20+ measures temperature in degrees Celsius with 9 to 12-bit precision and includes an alarm function with nonvolatile user-programmable upper and lower trigger points. Sensing range is -55C to 125C (accurate to ±0.5°C over the range of -10°C to +85°C), and each sensor has a unique 64-bit serial number hard-programmed enabling the use of a number of sensors on a single data bus.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eThe DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor, and can be powered on the Raspberry Pi's 3.3V power line.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cem\u003eNote: Image is a representation and may show another brand, however we only ship authentic Maxim sensors.\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003ch2\u003eThe DS18B20+ Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUnique 1-Wire Interface Requires Only One Port Pin for Communication\u003c\/li\u003e\n\u003cli\u003eEach Device has a Unique 64-Bit Serial Code Stored in an On-Board ROM\u003c\/li\u003e\n\u003cli\u003eRequires No External Components\u003c\/li\u003e\n\u003cli\u003eCan Be Powered from Data Line; Power Supply Range is 3.0V to 5.5V\u003c\/li\u003e\n\u003cli\u003eMeasures Temperatures from -55°C to +125°C (-67°F to +257°F)\u003c\/li\u003e\n\u003cli\u003e±0.5°C Accuracy from -10°C to +85°C\u003c\/li\u003e\n\u003cli\u003eThermometer Resolution is User Selectable from 9 to 12 Bits\u003c\/li\u003e\n\u003cli\u003eConverts Temperature to 12-Bit Digital Word in 750ms (Max)\u003c\/li\u003e\n\u003cli\u003eUser-Definable Nonvolatile (NV) Alarm Settings\u003c\/li\u003e\n\u003cli\u003eAlarm Search Command Identifies and Addresses Devices Whose Temperature is Outside Programmed Limits (Temperature Alarm Condition)\u003c\/li\u003e\n\u003cli\u003eTO-92 Package Layout\u003c\/li\u003e\n\u003cli\u003eSoftware Compatible with the DS1822\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTutorials\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe DS18B20+ One Wire Digital Temperature Sensor and the Raspberry Pi\u003c\/strong\u003e\u003c\/p\u003e","brand":"Maxim","offers":[{"title":"Default Title","offer_id":53957865832632,"sku":"xyl1787257936896","price":5.39,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/ds18b20-one-wire-digital-temperature-sensor_1.jpg?v=1787257945"},{"product_id":"dexter-temperature-humidity-pressure-sensor-discontinued","title":"Dexter - Temperature, Humidity \u0026 Pressure Sensor [Discontinued]","description":"\u003cp\u003e\u003cstrong\u003eTemperature Humidity Pressure Sensor for a Raspberry Pi Robot!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Temperature Humidity Pressure Sensor can be mounted to Dexter Industries robots like the GoPiGo, GrovePi, and BrickPi . It detects temperature, humidity and pressure from the surrounding environment. For this reason, it is often called a weather sensor.\u003c\/p\u003e\n\u003cp\u003eThe sensor will measure atmospheric pressure between 30kPa to 110kPa, relative humidity and temperature. It comes with a grove cable to plug the sensor into the GoPiGo3, BrickPi, or GrovePi and begin measuring; no soldering required!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeather Sensor for Classroom Projects. \u003c\/strong\u003eThis sensor can be used by educators to teach concepts such as weather, environmental impact, and even plant growth. Some popular projects that use this sensor include a weather station and plant monitoring station.\u003c\/p\u003e","brand":"Dexter Industries","offers":[{"title":"Default Title","offer_id":53957865898168,"sku":"xxr1787257937826","price":14.39,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/dexter---temperature-humidity-pressure-sensor-discontinued_1.jpg?v=1787257946"},{"product_id":"flightaware-pro-stick-usb-sdr-ads-b-receiver","title":"FlightAware Pro Stick (USB SDR ADS-B Receiver)","description":"\u003cp\u003eAutomatic Dependent Surveillance-Broadcast (ADS-B) is a technology that enables aircraft to determine their position via satellite and then broadcast it. This information can be received by ground stations enabling aircraft to be tracked. With FlightAware, you can build and run your own ADS-B ground station that can be installed anywhere and receive real-time data directly from airplanes on your Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eThe FlightAware Pro Stick is a USB SDR ADS-B Receiver with the FlightAware Pro Stick and Pro Stick Plus, high-performance USB R820T2 Software Defined Radios (SDR) with a built-in RF amp for maximum ADS-B\/MLAT performance. The first of its kind, FlightAware's Pro Stick is compatible with PiAware or any other device that supports USB RTLSDR receivers.\u003c\/p\u003e\n\u003cp\u003eThe Pro Stick and Pro Stick Plus are roughly the size of a traditional USB stick and require no external power. There are no moving parts.\u003c\/p\u003e\n\u003ch2\u003ePro Stick Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher Performance for ADS-B and MLAT\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e20-100% range improvement vs traditional USB SDR sticks\u003c\/li\u003e\n\u003cli\u003eR820T2 SDR combined with FlightAware RF Amplifier (USB powered)\u003c\/li\u003e\n\u003cli\u003eNative SMA connector yields reduced loss due to antenna cabling\/adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasier to Setup\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSMA F connector for easy connectivity to high-performance antenna\u003c\/li\u003e\n\u003cli\u003eNo MCX adapters required\u003c\/li\u003e\n\u003cli\u003eNo external amplifier required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePro Stick Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip\u003c\/strong\u003e: R820T2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier\u003c\/strong\u003e: 19dB with 0.4dB noise figure and OIP3 +39dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTCXO\u003c\/strong\u003e: 0.5 ppm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Draw\u003c\/strong\u003e: 300mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 17g \/ 0.6oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 95mm x 32mm x 13mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Port\u003c\/strong\u003e: SMA female (requires SMA antenna cable and optionally N-male adapter for large antenna)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange\u003c\/strong\u003e: Over 275nm\/500km depending on installation quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance\u003c\/strong\u003e: 20-100% range improvement for Mode S message vs traditional RTL SDR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComputer\u003c\/strong\u003e: Raspberry Pi 3 Running PiAware Recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSetup Guide\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FlightAware","offers":[{"title":"Default Title","offer_id":53957865996472,"sku":"ike1787257939407","price":30.35,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/flightaware-pro-stick-usb-sdr-ads-b-receiver_1.jpg?v=1787257948"},{"product_id":"flightaware-978-1090-mhz-ads-b-bandpass-sma-filter","title":"FlightAware 978-1090 MHz ADS-B Bandpass SMA Filter","description":"\u003cp\u003eSMA (female to male) 1090MHz Mode S filter. Designed to reduce interference and significantly improve valid mesage rate of ADS-B\/Mode S receivers. Passes range 980MHz - 1150MHz. Impedance is 50ohms and insertion loss is \u0026lt;2.5dB.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1090MHZ ADS-B \/ Mode S Filter\u003c\/li\u003e\n\t\u003cli\u003eSMA Female to SMA Male\u003c\/li\u003e\n\t\u003cli\u003ePasses range 980MHz - 1150MHz\u003c\/li\u003e\n\t\u003cli\u003eReduces RF noise, increasing number of ADS-B\/Mode S messages\u003c\/li\u003e\n\t\u003cli\u003eIdeal for RTL-SDR USB Dongle receivers like PiAware\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"FlightAware","offers":[{"title":"Default Title","offer_id":53957866029240,"sku":"fmm1787257940340","price":26.57,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/flightaware-978-1090-mhz-ads-b-bandpass-sma-filter_1.jpg?v=1787257948"},{"product_id":"flightaware-pro-stick-plus-usb-sdr-ads-b-receiver","title":"FlightAware Pro Stick Plus (USB SDR ADS-B Receiver)","description":"\u003cp\u003eAutomatic Dependent Surveillance-Broadcast (ADS-B) is a technology that enables aircraft to determine their position via satellite and then broadcast it. This information can be received by ground stations enabling aircraft to be tracked. With FlightAware, you can build and run your own ADS-B ground station that can be installed anywhere and receive real-time data directly from aeroplanes on your Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eFlightAware has revolutionized the world of USB SDR ADS-B Receivers with the FlightAware Pro Stick and Pro Stick Plus, high-performance USB R820T2 Software Defined Radios (SDR) with a built-in RF amp for maximum ADS-B\/MLAT performance. The first of its kind, FlightAware's Pro Stick is compatible with PiAware or any other device that supports USB RTLSDR receivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Pro Stick Plus adds a built-in 1090 MHz bandpass filter for increased performance and range of reception in areas with moderate RF noise as is typically experienced in most urban areas.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Pro Stick and Pro Stick Plus are roughly the size of a traditional USB stick and require no external power. There are no moving parts.\u003c\/p\u003e\n\u003ch2\u003ePro Stick Plus Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher Performance for ADS-B and MLAT\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases range 10-20% over Pro Stick when filtering is beneficial\n\u003cul\u003e\n\u003cli\u003eA 1090 MHz bandpass filter (whether built-in or a separate external part) is generally recommended for users in urban environments or with known high power radio transmitters nearby such as cell phone towers. Filtering is generally not recommended for users in rural environments. \u003cstrong\u003eFiltering benefits may vary and are dependent on the installation location\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdds Built-in 1090 MHz filter with R820T2 SDR and RF Amplifier (USB powered)\u003c\/li\u003e\n\u003cli\u003eNative SMA connector yields reduced loss due to antenna cabling\/adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasier to Setup\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSMA F connector for easy connectivity to high-performance antenna\u003c\/li\u003e\n\u003cli\u003eNo MCX adapters required\u003c\/li\u003e\n\u003cli\u003eNo external amplifier required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003ch2\u003ePro Stick Plus Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip\u003c\/strong\u003e: R820T2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier\u003c\/strong\u003e: 19dB with 0.4dB noise figure and OIP3 +39dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTCXO\u003c\/strong\u003e: 0.5 ppm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter\u003c\/strong\u003e: 1,075 MHz to 1,105 MHz pass band with insertion loss of 2.3 dB; 30 dB attenuation on other frequencies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Draw\u003c\/strong\u003e: 300 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 17 g \/ 0.6 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 95 mm x 32 mm x 13 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Port\u003c\/strong\u003e: SMA female (requires SMA antenna cable and optionally N-male adapter for large antenna)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange\u003c\/strong\u003e: Over 300 nm\/550 km depending on installation quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e 10-20% more Mode S messages in installations where filtering is beneficial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComputer\u003c\/strong\u003e: Raspberry Pi 3 Running PiAware Recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSetup Guide\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"FlightAware","offers":[{"title":"Default Title","offer_id":53957866094776,"sku":"ymv1787257941552","price":31.5,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/flightaware-pro-stick-plus-usb-sdr-ads-b-receiver_1.jpg?v=1787257950"},{"product_id":"flightaware-1090mhz-ads-b-n-type-antenna-26-55dbi-discontinued","title":"FlightAware 1090MHz ADS-B N-Type Antenna 26\" - 5.5dBi [Discontinued]","description":"\u003cp\u003eThis is the official FlightAware high-performance, omni directional antenna for receiving 1090MHz Mode S and ADS-B data from aircraft.\u003c\/p\u003e\n\u003cp\u003eThe antenna can be used outdoors, mounted on a mast that is 2.5cm to 4cm in diameter (not included), or installed indoors against a window. When properly installed without obstructions, the antenna can receive ADS-B data from aircraft up to 250mi \/ 400km away.\u003c\/p\u003e\n\u003cp\u003eMounting bracket and U-bolts included. Compatible with all ADS-B receivers including FlightFeeder, PiAware, Mode S Beast, Radarcape, Kinetic SBS1\/SBS3, RTL Dongles, and more.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQuality: 1090MHz\u003c\/li\u003e\n\u003cli\u003eGain: 5.5dBi Avg\u003c\/li\u003e\n\u003cli\u003eRadiation: Omni\u003c\/li\u003e\n\u003cli\u003eConnector: N-FEMALE.\u003c\/li\u003e\n\u003cli\u003eSuitable for Mode S and ADS-B data from Aircraft USA\u003c\/li\u003e\n\u003cli\u003eFinish: Olive Green\u003c\/li\u003e\n\u003cli\u003e26\"\/66cm Long\u003c\/li\u003e\n\u003cli\u003eBracket Dimensions\n\u003cul\u003e\n\u003cli\u003e4 x 7mm Holes in Rectangular Pattern. Vertical Spacing: 39mm \/ Horizontal Spacing 48mm (Center to Center)\u003c\/li\u003e\n\u003cli\u003e2 x 45mm Diameter Clamps \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FlightAware","offers":[{"title":"Default Title","offer_id":53957866160312,"sku":"syr1787257942503","price":36.85,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/flightaware-1090mhz-ads-b-n-type-antenna-26---55dbi-discontinued_1.jpg?v=1787257951"},{"product_id":"flightaware-1090-mhz-ads-b-bandpass-sma-filter","title":"FlightAware 1090 MHz ADS-B Bandpass SMA Filter","description":"\u003cp\u003eSMA (female to male) 1090MHz Mode S filter. Designed to reduce interference and significantly improve valid mesage rate of ADS-B\/Mode S receivers. \u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cb\u003eThis is the new \u003c\/b\u003e\u003c\/u\u003e\u003cu\u003e\u003cb\u003e2019 version which features a narrower pass band frequency range  of 1080MHz - 1100MHz\u003c\/b\u003e\u003c\/u\u003e.\u003c\/p\u003e\u003cp\u003eImpedance is 50ohms and insertion loss is \u0026lt;2.5dB.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1090MHZ ADS-B \/ Mode S Filter\u003c\/li\u003e\n\u003cli\u003eSMA Female to SMA Male\u003c\/li\u003e\n\u003cli\u003ePass Band Frequency Range: 1080 - 1100MHz\u003c\/li\u003e\n\u003cli\u003eManufacturer PN: PCT-BPF-1080-1100\u003c\/li\u003e\n\u003cli\u003ePass Band Insertion Loss: \u0026lt;2.5 dB\u003c\/li\u003e\n\u003cli\u003eStop Band Rejection: \u0026gt;30 dB\u003c\/li\u003e\n\u003cli\u003eNominal Impedance: 50 Ohm\u003c\/li\u003e\n\u003cli\u003eApproximate dimensions: 1.5 inches x 2.25 inches\u003c\/li\u003e\n\u003cli\u003eReduces RF noise, increasing number of ADS-B\/Mode S messages\u003c\/li\u003e\n\u003cli\u003eIdeal for RTL-SDR USB Dongle receivers like PiAware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003c\/ul\u003e\n","brand":"FlightAware","offers":[{"title":"Default Title","offer_id":53957866225848,"sku":"qew1787257943491","price":20.2,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/flightaware-1090-mhz-ads-b-bandpass-sma-filter_1.jpg?v=1787257952"},{"product_id":"dexter-light-color-sensor-discontinued","title":"Dexter - Light \u0026 Color Sensor [Discontinued]","description":"\u003cp\u003e\u003cstrong\u003eLight \u0026amp; Color Sensor for a Raspberry Pi Robot!\u003c\/strong\u003e The Light \u0026amp; Color Sensor can be mounted to Dexter Industries robots like the GoPiGo, GrovePi, and BrickPi. It detects light levels and color from the surrounding environment.\u003c\/p\u003e\n\u003cp\u003eIt comes with a grove cable to plug the sensor into the GoPiGo3, BrickPi, or GrovePi and begin measuring; no soldering required!\u003c\/p\u003e\n\u003cp\u003eThis RGB color and light sensor helps your robot see in color and light. The sensor can read all visible colors and light intensity. You can use the sensor to read the color of an object, or to read the intensity of light in the room. It can be programmed in Python, Scratch or Bloxter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClassroom Projects. \u003c\/strong\u003eThis sensor can be paired with the Temperature, Humidity, \u0026amp; Pressure Sensor and used by educators to teach concepts such as weather, environmental impact, and even plant growth. Some popular projects that use this sensor include a weather station and plant monitoring station.\u003c\/p\u003e","brand":"Dexter Industries","offers":[{"title":"Default Title","offer_id":53957866487992,"sku":"qyq1787257944459","price":15.59,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/dexter---light-color-sensor-discontinued_1.jpg?v=1787257953"},{"product_id":"adafruit-htu31-temperature-humidity-sensor-breakout-board","title":"Adafruit HTU31 Temperature \u0026 Humidity Sensor Breakout Board","description":"\u003cp\u003eThe HTU31-D is the third generation of temperature-humidity sensors from TE - and a great follow-up to the popular HTU21-D sensor. Like the HTU21, the '31 is great for sensing temperature and humidity, with excellent specifications.\u003c\/p\u003e\n\u003cp\u003eThis I2C digital humidity sensor is an accurate and intelligent alternative to the common DHT-series sensors, at about the same price! It has a typical accuracy of ±2% at 20% to 100% relative humidity, at a temperature range of 0 to 70°C. Operation outside this range is still possible - just the accuracy might drop a bit. The temperature output has an accuracy of ±0.2°C from -0~100°C, on par with the better quality on-chip sensors we've stocked.\u003c\/p\u003e\n\u003cp\u003eThe sensor also has an on-board heater that can be controlled on and off to help evaporate condensation on the sensing element. Of course, temperature sensing will not be accurate with the heater on. Data reads come with CRC, so you can be more confident of data that is read compared to other I2C sensors.\u003c\/p\u003e\n\u003cp\u003eOther nice extras: a hardware reset pin, an address-select pin so you can have two on one I2C bus, and a thermal-isolation cut out so nearby circuitry has less effect on the readings.\u003c\/p\u003e\n\u003cp\u003eTo get you going fast, we spun up a custom made PCB in the \u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e form factor, making them easy to interface with. The STEMMA QT connectors on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the HTU31Ds or to chain them with a wide range of other sensors and accessories using a \u003cstrong\u003ecompatible cable\u003c\/strong\u003e. QT Cable is not included, but we have a variety in the shop. You can use this sensor safely with any kind of microcontroller\/microcomputer with 3.3V-5V power or logic.\u003c\/p\u003e\n\u003cp\u003eEach order comes with one fully assembled and tested PCB breakout and a small piece of header. You'll need to solder the header onto the PCB to use in a breadboard but it's fairly easy and takes only a few minutes even for a beginner.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eUses I2C address 0x40 or 0x41\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 25.5mm x 17.7mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1.6g \/ 0.1oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957904498872,"sku":"mfk1787258261373","price":4.69,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/adafruit-htu31-temperature-humidity-sensor-breakout-board_1.jpg?v=1787258269"},{"product_id":"adafruit-bme688-temperature-humidity-pressure-and-gas-sensor","title":"Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor","description":"\u003cp\u003eThe long-awaited BME688 from Bosch gives you \u003cem\u003eall the environmental sensing you want\u003c\/em\u003e in one small package. This little sensor contains \u003cstrong\u003etemperature\u003c\/strong\u003e, \u003cstrong\u003ehumidity\u003c\/strong\u003e, \u003cstrong\u003ebarometric pressure,\u003c\/strong\u003e and \u003cstrong\u003eVOC gas\u003c\/strong\u003e sensing capabilities. All over SPI or I2C at a great price!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe BME688 is a 'drop in' replacement for the BME680\u003c\/strong\u003e - it adds a method of programming the gas-sensor heater for controlled odor-analysis but is otherwise the same hardware. Check out this EYE ON NPI for more details about the machine-learning system you can use to program this sensor for odor detection.\u003c\/p\u003e\n\u003cp\u003eLike the BME280 \u0026amp; BMP280, this precision sensor from Bosch can measure humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuracy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude and the pressure measurements are so good, you can also use it as an altimeter with  ±1 meter or better accuracy!\u003c\/p\u003e\n\u003cp\u003eThe BME688 takes those sensors to the next step in that it contains a small MOX sensor. The heated metal oxide changes resistance based on the volatile organic compounds (VOC) in the air, so it can be used to detect gasses \u0026amp; alcohols such as Ethanol, Alcohol, and Carbon Monoxide, and perform air quality measurements. Note it will give you one resistance value, with overall VOC content, but it cannot differentiate gasses or alcohols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note this sensor, like \u003cem\u003eall\u003c\/em\u003e VOC\/gas sensors, has variability, and to get precise measurements you will want to calibrate it against known sources!\u003c\/strong\u003e That said, for general environmental sensors, it will give you a good idea of trends and comparisons. We recommend that you run this sensor for 48 hours when you first receive it to \"burn it in\", and then 30 minutes in the desired mode every time the sensor is in use. This is because the sensitivity levels of the sensor will change during early use, and the resistance will slowly rise over time as the MOX warms up to its baseline reading.\u003c\/p\u003e\n\u003cp\u003eFor your convenience, we've pick-and-placed the sensor on a PCB with a 3.3V regulator and some level shifting, so it can be easily used with your favorite 3.3V or 5V microcontroller. All of the pins of the BME688 are available on standard 0.100”\/ 2.54mm pitch headers for use with a breadboard. Should you wish to avoid soldering, we now also include our \u003cstrong\u003eStemma QT\u003c\/strong\u003e connectors (SparkFun Qwiic compatible). \u003cstrong\u003eUsing these handy connectors you can simply plug in the sensor, no soldering required! \u003c\/strong\u003eQT Cable is not included, but we have a variety in the shop\u003c\/p\u003e\n\u003cp\u003eOur detailed tutorial will get you going with code for both \u003cstrong\u003eArduino\u003c\/strong\u003e and \u003cstrong\u003eCircuitPython\u003c\/strong\u003e, schematics, wiring diagrams, Fritzing objects, and more!\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 25.5mm x 17.6mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1.7g \/ 0.1oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957904564408,"sku":"ecw1787258262292","price":14.98,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/adafruit-bme688---temperature-humidity-pressure-and-gas-sensor_1.jpg?v=1787258270"},{"product_id":"adafruit-mcp9808-high-accuracy-i2c-temperature-sensor-breakout","title":"Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout","description":"\u003cp\u003eThe MCP9808 digital temperature sensor is one of the more accurate\/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. With three address jumpers on the back, you can connect up to 8 to a single I2C bus without address collisions. Best of all, a wide voltage range makes it usable with 2.7V to 5.5V logic!\u003cbr\u003e\u003cbr\u003eUnlike the DS18B20, this sensor does not come in through-hole package so we placed this small sensor on a breakout board PCB for easy use. The PCB includes mounting holes, and pull down resistors for the 3 address pins. We even wrote a lovely little tutorial and library that will work with Arduino or CircuitPython. You'll be up and running in 15 minutes or less.\u003cbr\u003e\u003cbr\u003eSome quick specs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple I2C control\u003c\/li\u003e\n\u003cli\u003eUp to 8 on a single I2C bus with adjustable address pins\u003c\/li\u003e\n\u003cli\u003e0.25°C typical precision over -40°C to 125°C range (0.5°C guaranteed max from -20°C to 100°C)\u003c\/li\u003e\n\u003cli\u003e0.0625°C resolution\u003c\/li\u003e\n\u003cli\u003e2.7V to 5.5V power and logic voltage range\u003c\/li\u003e\n\u003cli\u003eOperating Current: 200 μA (typical)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo get you going fast, we spun up a custom made PCB with the MCP9808 and some supporting circuitry such as pull-up resistors and capacitors, in the \u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e form factor, making them easy to interface with. The STEMMA QT connectors on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the MCP9808 or to chain them with a wide range of other sensors and accessories using a \u003cstrong\u003ecompatible cable\u003c\/strong\u003e. QT Cable is not included, but we have a variety in the shop.\u003c\/p\u003e\n\u003cp\u003eEach order comes with one fully assembled and tested PCB breakout and a small piece of header. You'll need to solder the header onto the PCB to use with a solderless breadboard. but it's fairly easy and takes only a few minutes even for a beginner.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 25.4mm x 17.6mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\"\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 1.6g \/ 0.1oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":53957904629944,"sku":"yqv1787258263619","price":3.17,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/adafruit-mcp9808-high-accuracy-i2c-temperature-sensor-breakout_1.jpg?v=1787258271"},{"product_id":"sparkfun-qwiic-ultrasonic-distance-sensor-hc-sr04","title":"SparkFun Qwiic Ultrasonic Distance Sensor - HC-SR04","description":"\u003cdiv id=\"description-tab\" class=\"tab-pane fade\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp\u003eYou may be familiar with the classic HC-SR04 distance sensor, it is great for providing non-contact distance readings from 2cm to 400cm. The SparkFun Qwiic Ultrasonic Distance Sensor improves on the classic by adding a pair of Qwiic connectors to it, so now you can communicate over I\u003csup\u003e2\u003c\/sup\u003eC and daisy chain any other Qwiic product of your choosing.\u003c\/p\u003e\n\u003cp\u003eIf you prefer to bypass the Qwiic connector and I\u003csup\u003e2\u003c\/sup\u003eC you can also access the VCC, Trigger, Echo, and Ground pins broken out on the edge of the board. Please be aware that this ultrasonic sensor comes uncalibrated and you will need to manipulate the raw output for your specific application.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Sparkfun Qwiic Ultrasonic Distance Sensor Guide\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Ultrasonic Distance Sensor - HC-SR04\u003c\/li\u003e\n\u003cli\u003e1x Right-Angle Header - 4-pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv id=\"features-tab\" class=\"tab-pane fade\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage 3.3V\u003c\/li\u003e\n\u003cli\u003eDetecting Angle: 15 degrees\u003c\/li\u003e\n\u003cli\u003eSensor range: 2cm to 400cm\u003c\/li\u003e\n\u003cli\u003eAccuracy: 3mm\u003c\/li\u003e\n\u003cli\u003eMCU on board: STM8L051\u003c\/li\u003e\n\u003cli\u003eDefault I\u003csup\u003e2\u003c\/sup\u003eC Address: 0x00\u003c\/li\u003e\n\u003cli\u003eDimensions: 21.5 x 45.5mm\u003c\/li\u003e\n\u003cli\u003eWeight 9.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv id=\"documents-tab\" class=\"tab-pane fade\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic (PDF)\u003c\/li\u003e\n\u003cli\u003eEagle Files (ZIP)\u003c\/li\u003e\n\u003cli\u003eDatasheet (PDF)\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003e\nGithub (Eagle files and Example Code)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":53957904728248,"sku":"ktf1787258264692","price":13.32,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/sparkfun-qwiic-ultrasonic-distance-sensor---hc-sr04_1.jpg?v=1787258273"},{"product_id":"garmin-lidar-lite-v4-led-distance-measurement-sensor-qwiic","title":"Garmin LIDAR-Lite v4 LED - Distance Measurement Sensor (Qwiic)","description":"\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"description-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp\u003eThe LIDAR-Lite v4 Qwiic from GARMIN is a high-performance, wireless optical distance measurement sensor that doesn't require any soldering to get started. This is the ideal solution for drone, robot, IoT, or unmanned vehicle operations when space is tight and power is limited. This sensor has up to a 10 meter range, 1cm resolution, and requires 85mA during data acquisition. The user can read and write to the LIDAR-Lite v4 using the I\u003csup\u003e2\u003c\/sup\u003eC protocol; this is where the addition of the SparkFun Qwiic system really shines. The LIDAR sensor requires 5V to operate but runs on 3V3 logic. With a 5V boost circuit and an easy-to-use Qwiic connector, you can power the sensor and get distance measurements over Qwiic all with a single piece of hardware.\u003c\/p\u003e\n\u003cp\u003eThe LIDAR sensor works by sending out an infrared beam and measuring the time it takes to be reflected back. The LIDAR-Lite v4 utilizes LEDs rather than a laser for this iteration; therefore, it is inherently eye-safe under normal usage. The built-in nRF52840 microcontroller runs a pre-loaded \"out of the box\" stock application to calculate the distance between itself and something in front of it. The equipped nRF52840 also allows developers to create custom applications to expand on the \"out of the box\" functionality or connect to an external micro-controller running a custom user application.\u003c\/p\u003e\n\u003cp\u003eThe SparkFun LIDAR Lite v4 Arduino library makes getting data as easy as a call to the getDistance() function. The library also supports changing the I\u003csup\u003e2\u003c\/sup\u003eC address of each LIDAR and provides an easy example of how to do so. Its low power-consumption and I\u003csup\u003e2\u003c\/sup\u003eC address configuration means you can daisy-chain up to 10 of these sensors on one microcontroller platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The I\u003csup\u003e2\u003c\/sup\u003eC address of the Qwiic LIDAR-Lite v4 is 0x62 and is software-configurable to any address. A multiplexer\/Mux is required to communicate to multiple Qwiic LIDAR-Lite v4 sensors on a single bus. If you need to use more than one Qwiic LIDAR-Lite v4 sensor consider using the Qwiic Mux Breakout.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Garmin Lidar-Lite V4 (Qwiic) Hookup guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/pgklSqYWkaI?si=JezH8vDlX8J3t8CA\u0026amp;start=83\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"features-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eResolution: 1cm\u003c\/li\u003e\n\u003cli\u003eMeasurement repeatability:\n\u003cul\u003e\n\u003cli\u003eAs measured indoors to a 90% reflective target\u003c\/li\u003e\n\u003cli\u003e1cm is equivalent to one standard deviation\u003c\/li\u003e\n\u003cli\u003eUsing “high accuracy” mode, with averaging:\n\u003cul\u003e\n\u003cli\u003e+\/- 1cm to 2 meters\u003c\/li\u003e\n\u003cli\u003e+\/- 2cm to 4 meters\u003c\/li\u003e\n\u003cli\u003e+\/- 5cm to 10 meters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRange: 5 cm to 10 meters (as measured from back of unit)\u003c\/li\u003e\n\u003cli\u003eUpdate rate:\n\u003cul\u003e\n\u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC = \u0026gt;200Hz typical\u003c\/li\u003e\n\u003cli\u003eANT® = up to 200Hz to a 90% target indoors at 2m in normal operating mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterface: I\u003csup\u003e2\u003c\/sup\u003eC or ANT; user configurable for SPI using the Nordic SDK\u003c\/li\u003e\n\u003cli\u003ePower (operating voltage): 3.3VDC\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20 to 60° C\u003c\/li\u003e\n\u003cli\u003eLED wavelength: 940nm\u003c\/li\u003e\n\u003cli\u003eBeam divergence: 4.77°\u003c\/li\u003e\n\u003cli\u003eOptical aperture: 14.9mm\u003c\/li\u003e\n\u003cli\u003eUnit size (LxWxH): 2.8in x 1.0in x 0.9in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv role=\"tabpanel\" class=\"tab-pane fade\" id=\"documents-tab\"\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eBoard Dimensions\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eGarmin LIDAR Lite v4 Product Information:\n\u003cul\u003e\n\u003cli\u003eGarmin: Operation Manual and Technical Specifications\u003c\/li\u003e\n\u003cli\u003eGarmin: Safety and Product Information\u003c\/li\u003e\n\u003cli\u003eGarmin: LIDAR-Lite Arduino Library Github\u003c\/li\u003e\n\u003cli\u003eGarmin: LIDAR-Lite ANT Library\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSparkFun: Qwiic LIDAR Lite v4 Arduino library\u003c\/li\u003e\n\u003cli\u003eQwiic Info Page\u003c\/li\u003e\n\u003cli\u003eGitHub Hardware Repo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":53957904793784,"sku":"uyk1787258265648","price":90.81,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/garmin-lidar-lite-v4-led---distance-measurement-sensor-qwiic_1.jpg?v=1787258273"},{"product_id":"led-current-meter-10a-red","title":"LED Current Meter 10A (Red)","description":"\u003cp\u003eThis is a \u003cb\u003eRed \u003c\/b\u003eLED Current Meter capable of measuring and displaying current in a circuit up to 10A.\u003c\/p\u003e \u003cp\u003eIt measures 0-9.99A with 2% accuracy. Just apply four wires to your circuit and it will give you a current reading straight away.  Easy to use and a good companion to any robot project.\u003c\/p\u003e \u003cp\u003ePlease carefully follow the instructions for wiring. The power supply terminal and measurement terminal of this LED Current Meter use a common-ground connection. So, the measurement must be cascaded after loads. It's better to isolate the power supply.\u003c\/p\u003e \u003ch2\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cul\u003e \u003cli\u003eMeasure Current: 0-9.99A DC\u003c\/li\u003e \u003cli\u003ePower supply voltage: 4-30V DC  \u003c\/li\u003e \u003cli\u003eDisplay mode: 3-bit 0.56 Led digital tube\u003c\/li\u003e \u003cli\u003eAccuracy:2%\u003c\/li\u003e \u003cli\u003eOpening dimension: 45.5mm*26.5mm\u003c\/li\u003e \u003cli\u003eDimension: 48mm*29mm*21mm\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003ch2\u003e\u003cstrong\u003eShipping List\u003c\/strong\u003e\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cul\u003e \u003cli\u003e1x LED Current Meter 10A (Red)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957905023160,"sku":"ugi1787258267291","price":3.96,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/led-current-meter-10a-red_1.jpg?v=1787258275"},{"product_id":"magnetic-switch","title":"Magnetic Switch","description":"\u003cdiv class=\"desc\"\u003e \u003cdiv class=\"desCon\"\u003e \u003cp\u003eThis magnetic switch comprises two parts - the inducting end and trigger. The former has a reed switch enclosed inside and there is a cable connected to it, and the latter is a magnet enclosed within a plastic case. When the distance of these two parts is smaller than 1cm, the reed switch will be connected, by which the position change of an object can be detected for functions like travel controlling, position-limitation protection etc.\u003c\/p\u003e \u003cp\u003eCharacterised with reliable performance, long life-span, low power consumption, wide voltage range and high operating frequency, this magnetic switch is very applicable to harsh environments and can be used as a door\/window position limiting device, intelligent toilet, car\/electrical bike anti-theft, smart home and more.\u003c\/p\u003e \u003c\/div\u003e \u003ch2\u003eSpecification\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cul\u003e \u003cli\u003eDimension: 6*14*23mm\u003c\/li\u003e \u003cli\u003eOutput Mode: NO\/NO+NC\u003c\/li\u003e \u003cli\u003ePower Voltage: 0~380VDC\/AC\u003c\/li\u003e \u003cli\u003eContact Rating: 1W\u003c\/li\u003e \u003cli\u003eLoad Current: ≤50mA\u003c\/li\u003e \u003cli\u003eOperating Temperature: -10~70℃\u003c\/li\u003e \u003cli\u003eOperating Humidity: 25~95%\u003c\/li\u003e \u003cli\u003eSwitching Frequency: 200Hz\u003c\/li\u003e \u003cli\u003eWithstand Voltage: 1000V\/AC 50\/60HZ 60S\u003c\/li\u003e \u003cli\u003eInsulation Resistance: ≥50MΩ（500VDC）\u003c\/li\u003e \u003cli\u003eWithstand Vibration: 50HZ\u003c\/li\u003e \u003cli\u003eProtection Grade: IP67\u003c\/li\u003e \u003cli\u003eEnclosure Material: PBT\/ABS\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003ch2\u003eShipping List\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e \u003cul\u003e \u003cli\u003eMagnetic Switch x1\u003c\/li\u003e \u003cli\u003eMagnet x1\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957905088696,"sku":"nwy1787258268494","price":2.77,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/magnetic-switch_1.jpg?v=1787258276"},{"product_id":"mmwave-radar-human-presence-detection","title":"mmWave Radar - Human Presence Detection","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis 24GHz millimeter-wave radar sensor employs FMCW, CW multi-mode modulation and separate transmitter \u0026amp; receiver antenna structure.\u003c\/p\u003e\n\u003cp\u003eIn working, the sensor first emits FMCW and CW radio waves to the sensing area. Next, the radio waves, reflected by all targets which are in moving, micro-moving or extremely weak moving state in the area, are converted into electrical signals by the millimeter-wave MMIC circuit in the sensor system. After that, these signals will be sent to the processor and processed through the related signal and data algorithms. Then, the target information can be solved.\u003c\/p\u003e\n\u003cp\u003eThe millimeter-wave radar can sense human presence as well as stationary and moving people within the detection area. Moreover, it can even detect static or stationary human presence such as a sleeping person.\u003c\/p\u003e\n\u003cp\u003eThere are two ways provided to output detection result: serial port and I\/O port switch quantity. Besides that, the sensor module features strong sensing reliability, high sensitivity, small size and is easy to use or embedded in applications.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2 style=\"text-align: left;\"\u003e\u003cb\u003eConnection Example\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"mmWave connection diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Board-Overview.jpg?v=1626100786\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eHuman presence sensing: sense if there is human body in areas\u003c\/li\u003e\n\u003cli\u003eI\/O port switch quantity input and output control\u003c\/li\u003e\n\u003cli\u003eSerial port input and output control\u003c\/li\u003e\n\u003cli\u003eStrong anti-interference ability, not to be affected by snow, haze, temperature, humidity, dust, light, noise etc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003ePower Supply: 3.6~5V\u003c\/li\u003e\n\u003cli\u003eOperating Current: 90mA\u003c\/li\u003e\n\u003cli\u003eDetection Distance: 9m\u003c\/li\u003e\n\u003cli\u003eEquivalent Transmit Power: 13-15dBM\u003c\/li\u003e\n\u003cli\u003eBeam Angle: 100*40°\u003c\/li\u003e\n\u003cli\u003eModulation Mode: FMCW, CW\u003c\/li\u003e\n\u003cli\u003eOperating Frequency: 24GHz\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range: -40~85℃\u003c\/li\u003e\n\u003cli\u003eBaud Rate: 9600\u003c\/li\u003e\n\u003cli\u003eDimension: 24*28mm\/0.94*1.10\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eProduct wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x mmWave Radar - Human Presence Detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":53957905187000,"sku":"qtw1787258269095","price":19.25,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/mmwave-radar---human-presence-detection_1.jpg?v=1787258277"},{"product_id":"grove-multichannel-gas-sensor-v2","title":"Grove - Multichannel Gas Sensor v2","description":"\u003cp\u003e\u003cspan\u003eThe Grove - Multichannel Gas Sensor V2 provides a stable and reliable gas detecting function of four sorts of gases. \u003c\/span\u003e\u003cspan\u003eIt can detect a variety of gases, including Carbon monoxide (CO), Nitrogen dioxide (NO2), Ethyl alcohol(C2H5CH) and Volatile Organic Compounds (VOC).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWorried about not recognizing the gas around your workplace or other surroundings and environment? The Grove - Multichannel Gas Sensor V2 has 4 measuring units, each of which is sensitive to various kinds of gases which means you are able to get four sets of data at the same time. And different sorts of gases can also be judged by these four sets of data.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe gas sensor used in this module is based on MEMS technology and has the advantage of being in a small size with considerable measurement stability and is more suitable for qualitative than quantitative measurement.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour fully independent sensor elements on one package.\u003c\/li\u003e\n\u003cli\u003eThe ability to detect a variety of gases, besides Carbon monoxide (CO), Nitrogen dioxide (NO2), Ethyl alcohol(C2H5CH), Volatile Organic Compounds (VOC) and etc.\u003c\/li\u003e\n\u003cli\u003eQualitative detecting, rather than quantitative.\u003c\/li\u003e\n\u003cli\u003eCompact size for easy deployment.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct number: Seeed 101020820\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Multichannel gas sensor board\u003c\/li\u003e\n\u003cli\u003e1x Grove cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003ctable class=\"tg\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"tg-ho6i\"\u003e\u003cspan data-style=\"color: #000000;\"\u003eMCU\u003c\/span\u003e\u003c\/th\u003e\n\u003cth class=\"tg-qeeq\"\u003e\u003cspan data-style=\"color: #000000;\"\u003eSTM32F030\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tg-wqpy\"\u003e\u003cspan data-style=\"color: #000000;\"\u003eInterface\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"tg-qya6\"\u003e\u003cspan data-style=\"color: #000000;\"\u003e0x55\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tg-wqpy\"\u003e\u003cspan data-style=\"color: #000000;\"\u003eI2C address\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"tg-qya6\"\u003e\u003cspan data-style=\"color: #000000;\"\u003e3.3V~5V\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tg-wqpy\"\u003e\u003cspan data-style=\"color: #000000;\"\u003eOnboard Gas Sensors\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"tg-qya6\"\u003e\u003cspan data-style=\"color: #000000;\"\u003eGM-102B; GM-302B; GM-502B; GM-702B\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eHow Does Storage Time Affect The Recommended Warm-Up Time of This Sensor?\u003c\/h2\u003e\n\u003ctable class=\"tg\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"tg-d1r8\"\u003eStorage time\u003c\/th\u003e\n\u003cth class=\"tg-d1r8\"\u003eRecommended warm-up time\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tg-c4sg\"\u003eLess than 1 month\u003c\/td\u003e\n\u003ctd class=\"tg-c4sg\"\u003eNo less than 24 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tg-c4sg\"\u003e1-6 months\u003c\/td\u003e\n\u003ctd class=\"tg-c4sg\"\u003eNo less than 48 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"tg-c4sg\"\u003eOver 6 months\u003c\/td\u003e\n\u003ctd class=\"tg-c4sg\"\u003eNo less than 72 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe module should avoid being placed in the volatile silicon compound steam, or it will cause the sensitivity to be reduced and irrecoverable.\u003c\/li\u003e\n\u003cli\u003eThe module should avoid being exposed to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.), otherwise, it will be irreversibly damaged.\u003c\/li\u003e\n\u003cli\u003eThe module should not be placed in water or ice.\u003c\/li\u003e\n\u003cli\u003eAfter the module is powered on, the sensor will heat up to a certain degree during the process, which is a normal phenomenon.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eUsers MUST preheat the module before starting to measure gases\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":53957905285304,"sku":"dmm1787258270390","price":20.74,"currency_code":"BOB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0885\/2691\/3720\/files\/grove---multichannel-gas-sensor-v2_1.jpg?v=1787258279"}],"url":"https:\/\/www.elmfable.com\/collections\/sensors.oembed","provider":"My Store","version":"1.0","type":"link"}